General Info

On/Off

Turning NM2 on

You turn NM2 on by pressing button #1 (top left).

Turning NM2 off

You turn NM2 off by pressing and holding button #1 for 10 seconds until the LEDs stop illuminating.

The LED's on NM2 are used to indicate various states that the device is in.

LED #1 (left) - Power/Charging

When charging, LED 1 will turn blue.

When completed, LED 1 will turn off (if the device is sleeping), or go red (if the device is powered on).

LED #2 (right) - Input

When NM2 is on and receiving a button press, LED #2 will illuminate green or blue.

If LED #2 is green, that indicates the device is not connected via bluetooth and is only sending USB MIDI.

If LED #2 is blue, that indicates it is connected to bluetooth and sending both USB & bluetooth MIDI.

NM2 can connect via both USB & bluetooth MIDI.

bluetooth MIDI

Bluetooth MIDI will immediately start broadcasting after turning on NM2.

USB MIDI

USB MIDI is constantly sending via the USB C port. You are able to send both bluetooth and USB MIDI simultaneously.

NM2 comes equipped with a 500 mAh battery, rechargeable via the USB C port.

Many apps come with built in MIDI mapping features, to map the buttons/encoders/tilt quickly and conveniently.

If the app you're using doesn't come with MIDI mapping built in, feel free to use our Web App Customizer.

Please note: when MIDI mapping place NM2 on a flat surface to ensure the MIDI tilt sent by the device doesn't interfere with your mapping.